• 2x 6.3 mm TS Jack in, 2x balanced XLR out

• Prevents ground loops, hum and buzz

• Road proof housing with rubber feet

• Low distortion

• No power supply needed

The DAP PDI-200 is a two-channel passive direct injection box. It converts a HI-Z signal into a LO-Z signal. You do not need a battery or phantom power for this direct box.

It is suitable for a wide array of applications, great for keyboard signals, acoustic & electric guitar signals and any other instrument signals that need to be plugged into a snake on stage. In addition, it has a 0/20/40 dB attenuation switch.

Specifications

Inputs

Mono Inputs                 2

Mono Input Connector                 TS unbalanced 6.3 mm

Mono Input Impedance                   50000 Ω

Outputs

Main Outputs                 2

Main Output Connector               3-pin XLR, TS unbalanced 6.3 mm

Main Output Impedance                 500 Ω

Audio Specifications

THD Level                  < 0.003 %

Signal-to-noise Ratio                  > 95 dB

Crosstalk                    96 dBu

Frequency Response Minimum                  30 Hz

Frequency Response Maximum                 50000 Hz

Phantom Power              No

Mechanical Specifications

Height (mm)                55 mm (2.165″)

Width (mm)                 140 mm (5.512″)

Length (mm)                 110 mm (4.331″)

Housing                  Aluminium

Weight                 1.1 kg (2.425 lb)

IP Rating                IP20 (indoor use only)

Colour               Black