This bundle includes 2x DAP Frigga Single active column PA system 2000w - black with covers.

• 1000 W RMS, max SPL of 134 dB at 1m (column)

• Multifunctional setup with two height options for optimum coverage

• Bi-amp satellite

• Microphone, line and Bluetooth 5.0 inputs with TWS

• Cables, mounting poles and spacer included

The DAP Frigga is an active PA speaker system with one subwoofer and one column speaker, suitable for singer-songwriters, corporate presenters, mobile DJs, nightlife venues, and bands. It offers three inputs: XLR microphone input with gain and clip indicator, XLR line input with passthrough, and Bluetooth with TWS support. The mixed output combines all signals. The SUB level control and Master level adjust the balance and volume. Status LEDs indicate the amplifier status.

The Frigga features an active dual 12" subwoofer with a built-in amplifier for the column speaker. The column speaker includes six 4" neodymium midrange drivers and a 1.5" neodymium compression driver. The built-in amplifier delivers 1000 W RMS (2000 W peak) across three channels. Two mounting poles adjust the height for various setups.

The Frigga comes with cables, mounting poles, and spacers and is available in black or white. Please note that microphone and line signals are not transmitted via Bluetooth when using TWS.

Specifications:

Outputs

Power Amplifier RMS Output     1000 W

Power Amplifier Peak Output     2000 W

Top Cabinet High Driver Power     250 W

Top Cabinet Low Driver Power     250 W

Subwoofer Power     500 W

Passive Output Connector     Speaker Connector 4 pole

Main Outputs     1

Main Output Connector     3-pin XLR

Inputs

Mono Inputs     2

Mono Input Connector     3-pin XLR

Audio Specifications

THD Level     < 0.3 %

Signal-to-noise Ratio     > 105 dB

AD/DA Convertor Sample Rate     48 kHz

Amp Technology     Class D /Class H

Speaker System     Active Subwoofer/ Active Bi-amp 2-way

Speaker Sensitivity (1 W/1 m)     96 dB

Max. SPL Subwoofer at 1 m     132 dB

Max. SPL Top Cabinet at 1 m     134 dB

DSP Processor Bitrate     24-bit

Frequency Response Minimum     40 Hz

Frequency Response Maximum     20000 Hz

Woofer Diameter     12 "

Woofer Voice Coil Diameter     2.5 "

Woofer Magnet Type     Ferrite

Satellite Woofer Diameter     4 "

Satellite Woofer Voice Coil Diameter     1 "

Satellite Woofer Magnet Type     Neodymium

Compression Driver Diameter     1 "

Compression Driver Voice Coil     1.8 "

Compression Driver Magnet Type     Ferrite

Subwoofer Dispersion Angle (Horizontal)     360 °

Subwoofer Dispersion Angle (Vertical)     180 °

Satellite Dispersion Angle (Horizontal)     110 °

Satellite Dispersion Angle (Vertical)     30 °

Electrical Specifications and Connections

Power Supply     100-240 V AC 50/60 Hz

Power Consumption     1100 W

Power Connector In     Power Pro Blue

Power Connector Out     Power Pro Grey

Mechanical Specifications

Top Cabinet Height     765 mm

Top Cabinet Width     135 mm

Top Cabinet Depth     200 mm

Subwoofer Height     865 mm

Subwoofer Width     430 mm

Subwoofer Depth     485 mm

Material     Plywood

Top Cabinet Weight     8 kg

Subwoofer Weight     25 kg

IP Rating     IP20 (indoor use only)

Colour     Black

Thermal Specifications

Maximum Ambient Temperature     40 °C (104 °F)

Minimum Ambient Temperature     -20 °C (-4 °F)

Included Items

Included Cables     Power Pro Cable, Speakercable