This bundle includes 2x DAP Frigga single active column PA system - white with covers.

• 1000 W RMS, max SPL of 134 dB at 1m (column)

• 40 - 20,000 Hz frequency range

• Bi-amp

• Microphone, line and Bluetooth 5.0 inputs with TWS

• Cables, mounting poles and spacer included

The DAP Frigga is an active PA speaker system with one subwoofer and one column speaker, suitable for singer-songwriters, corporate presenters, mobile DJs, nightlife venues, and bands. It offers three inputs: XLR microphone input with gain and clip indicator, XLR line input with passthrough, and Bluetooth with TWS support. The mixed output combines all signals. The SUB level control and Master level adjust the balance and volume. Status LEDs indicate the amplifier status.

The Frigga features an active dual 12" subwoofer with a built-in amplifier for the column speaker. The column speaker includes six 4" neodymium midrange drivers and a 1.5" neodymium compression driver. The built-in amplifier delivers 1000 W RMS (2000 W peak) across three channels. Two mounting poles adjust the height for various setups.

The Frigga comes with cables, mounting poles, and spacer and is available in black or white. Please note that microphone and line signals are not transmitted via Bluetooth when using TWS.

Specifications

Outputs

Power Amplifier RMS Output               1000 W

Power Amplifier Peak Output                  2000 W

Top Cabinet High Driver Power               250 W

Top Cabinet Low Driver Power               250 W

Subwoofer Power               500 W

Passive Output Connector             Speaker Connector 4 pole

Main Outputs            1

Main Output Connector              3-pin XLR

Inputs

Mono Inputs              2

Mono Input Connector                    3-pin XLR

Audio Specifications

THD Level             < 0.3 %

Signal-to-noise Ratio                 > 105 dB

AD/DA Convertor Sample Rate                48 kHz

Amp Technology                 Class D /Class H

Speaker System                   Active Subwoofer/ Active Bi-amp 2-way

Speaker Sensitivity (1 W/1 m)                    96 dB

Max. SPL Subwoofer at 1 m                 132 dB

Max. SPL Top Cabinet at 1 m                134 dB

DSP Processor Bitrate                 24-bit

Frequency Response Minimum                 40 Hz

Frequency Response Maximum                     20000 Hz

Woofer Diameter                   12 "

Woofer Voice Coil Diameter                   2.5 "

Woofer Magnet Type                    Ferrite

Satellite Woofer Diameter                   4 "

Satellite Woofer Voice Coil Diameter                 1 "

Satellite Woofer Magnet Type                Neodymium

Compression Driver Diameter                  1 "

Compression Driver Voice Coil                  1.8 "

Compression Driver Magnet Type                 Ferrite

Subwoofer Dispersion Angle (Horizontal)                  360 °

Subwoofer Dispersion Angle (Vertical)                 180 °

Satellite Dispersion Angle (Horizontal)                 110 °

Satellite Dispersion Angle (Vertical)                 30 °

Electrical Specifications and Connections

Power Supply                   100-240 V AC 50/60 Hz

Power Consumption                 1100 W

Power Connector In              Power Pro Blue

Power Connector Out                Power Pro Grey

Mechanical Specifications

Top Cabinet Height               765 mm (30.118″)

Top Cabinet Width                135 mm (5.315″)

Top Cabinet Depth                  200 mm (7.874″)

Subwoofer Height                    865 mm (34.055″)

Subwoofer Width                   430 mm (16.929″)

Subwoofer Depth                    485 mm (19.095″)

Material                  Plywood

Top Cabinet Weight                  9.2 kg (20.283 lb)

Subwoofer Weight                  37 kg (81.571 lb)       

IP Rating                IP20 (indoor use only)

Colour                White

Thermal Specifications

Maximum Ambient Temperature               40 °C (104 °F)

Minimum Ambient Temperature                 -20 °C (-4 °F)

Included Items

Included Cables          Power Pro Cable, Speakercable